Top sellers

Specials

ifi micro iPhono2 Phono Stage

Print

microiphono2

New

iFi Micro iPHONO 2 106dB dynamic range phono stage

More details

$ 999.00 $ 1,099.00

-$ 100.00

In-Stock At Supplier

Ifi Audio micro iPhono2.0
Vinyl is back – and it’s about time.

But vinyl has changed…

Where once, as a record began, crackle and hiss sent shivers down a listener’s spine, they now expect crystal-clear audio as soon as the needle hits the groove.

Enter the micro iPhono2.

Believe in better.

The micro iPhono2 changes the way you listen to vinyl recordings.

Listen to your record without it. Then plug in our phono stage and notice the difference.

Hiss and background noise are replaced with unmistakable clear sound that makes it hard to believe you’re listening to the same LP.

Believe.

Ifi Audio micro iPhono2.0

The mighty boost.

Most phono stages run in Mini volts or at 1 volt – and they amplify hiss.

The micro iPhono2 boosts the output to 2 volts while cutting hiss at the same time. No other phono stage has this kind of power.

And with multiple speed options, your vinyl will sound even more natural, just as the artists intended.

Old becomes new.

The micro iPhono2.0 is a high-end phono stage that changes the way you listen to your LP collection – for both vinyl experts and newcomers alike.

Make vinyl hiss a thing of the past with the micro iPhono2

We guarantee you’ll never look back.

Ifi Audio micro iPhono2.0

The tech spec.

The micro iPhono2 includes:

  • DirectDrive – To create accurate sound and sonic transparency,
  • Class A TubeState – To amplify the signal but not the background noise

Music becomes clearer and more life-like.

72dB-300x297.jpg

Any cartridge at any price to be accommodated optimally. Maximum gain is now an astonishing 72dB. This can handle the lowest of low output MC cartridges. Even the legendary Ortofon MC-5000 does not require sound-degrading step-up transformers.


multi-eq-225x300.jpg

The newly designed RIAA Equalisation circuit guarantees a +/- 0.2dB accuracy of the RIAA EQ from 20Hz – 20kHz - a truly reference class performance.

The iPhono2 is also a perfect match for older non-RIAA LPs too. It retains the very popular six different Stereo EQ curves found in the original iPhono. You will never have to put up with sub-optimal sound quality because of being unable to select the correct EQ curve ever again.


CA.png

The Class A stage has Pro series pedigree.

It combines N-Channel J-Fet and a PNP bi-polar transistor for a warm, unsurpassed, natural sound.


DC_Infinity-300x222.jpg

To DC Infinity and beyond. The all new 'DirectDrive® Servoless DC Infinity' circuit has no capacitor and no DC-Servo meaning no noise and no distortion.

Specifications

Freq. Resp.: 10Hz – 100KHz (±0.5dB)
20Hz – 20kHz (±0.2dB)
Dynamic Range: MM (36dB): > 111dB (A-weighted)
MC (60dB): > 106dB (A-weighted)
Signal-to-Noise Ratio: MM (36dB): > 85dB (A-weighted re. 5mV)
MC (60dB): > 85dB (A-weighted re. 0.5mV)
Overload Margin: MM (36dB): > 26dB (re. 5mV, @ 1% THD)
MC (60dB): > 22dB (re 0.5mV, @ 1% THD)
Crosstalk: <-70dB(1KHz)
Maximum undistorted output: 6V (Load >= 600 Ohm, THD <=1%)
Total Harmonic Distortion (THD): <0.0007% (MM 36dB 1V out 600R Load)
Output Impedance: <100Ω
Input Voltage: AC 100 – 240V, 50/60Hz
Power Consumption: < 5W (ships with iPOWER 15v – do NOT use any other power supply)
Dimensions: 6.2″ x 2.3″ x 1.1
Weight: 0.44 lbs.

New Zealand ifi Official Product. Come with ifi Manufactures Warranty.